Raptor 30 v2 PRO BUILT COMPLETE PACKAGE.

RC & ME is proud to offer:

100% professionally Built, configured and test flown for perfect hands off flying..

RAPTOR 30 with Pro-39H motor You will get the following:

1. A Raptor 30 Nitro heli with Pro-39H motor and pipe

2. A Spectrum DX7 radio system with 7000 RX and 4 x 821 servos (821 servos will be used for cyclic and motor control)

3. A Futaba 401 Gyro and matching 9254 digital High speed servo

4. A set of 550MM Main blades

5. The heli motor will be broken-in properly and fine tuned for max power.

6. 100% built and ready to fly. *** Our pro builders will completely build the heli, install the electronics, set-up the radio and configure the entire system. Once done, the heli will be taken and test flown, adjusted as needed till perfect and packaged for a safe trip to you.***

This model was designed and engineered by the World-renowned Mr.Shigetada Taya. It combines elements of his previously successful designs with today's advanced technologies. This is truly a versatile model helicopter for everyone. The Thunder Tiger team of engineers and test pilots have collected feedback from around the world and have made the Raptor 30 an even better helicopter. New molds and tooling for parts and many other areas have subtle changes to increase strength and durability. All production parts use the most modern technology available to meet the standards as set forth by ISO-9001. In the last few years we have spend time and resource to develop a new Thunder Tiger PRO-39H(R) engine for the Raptor 30 v2 and other 30 size helicopters. Available in ARF or kit form, the new Raptor 30 v2 and the PRO-39H(R) engine will provide you with many hours of enjoyment.

The first full-range 2.4GHz system for all types of aircraft is here Spektrum’s DX7 2.4GHz 7-channel programmable system featuring DSM2. Features • 20-Model memory • Airplane and Heli software • Switch assignment • P-mixes • Includes 3 powerful DS821 digital servos with high-tech resin gears • 3-axis dual rate & expo • 3-position flap (Airplane) • 5-point throttle curve (Heli) • 3 flight modes plus hold (Heli) • Gyro programming (Heli) • CCPM, 2-servo 90°, 3-servo 90°, & 3-servo 120° • Configured to default, helicopter model type (all airplane programming is available) Overview With the DX7 you’ll be able to fly anything from micro electric heli’s, to big gas-powered IMAC planes without regard to frequencies and free from fear of interference. Calling this kind of thing “revolutionary” just doesn’t cut it. It is nothing less than a quantum leap in RC technology that will change how you fly forever. Never again will the availability of a frequency pin dictate when you can take off. Never again will you have to ask, “What channel are you on?” Never again will your flying experience be interrupted by model-generated RF noise, interference from commercial broadcast towers, or anyone on another RC system. THE TRANSMITTER: THE SERVOS: THE AR7000 RECEIVER:

This is the Futaba GY401 Gyro with an S9254 Digital Servo. This is a high performance, compact and lightweight (AVCS) Angular Vector Control System gyro developed for model helicopters. Because the sensor and control circuit are integrated, it is simple to install. FEATURES: AVCS System: Since the rudder trim changes (caused by wind and other Meteorological changes) the front, rear, and other heli attitudes Change and are automatically cancelled; tail (rudder) operation is Easy, making it perfect for 3D flight. (also known as heading hold gyro) SMM Gyro Sensor: Use of this newly developed technology virtually eliminates rudder trim changes during flight (see COMMENTS). Digital Servo Compatible (DS Mode): DS mode makes it compatible with Futaba Digital Servos. This maximizes the high-speed response performance of the Digital Servo. Included high-speed S9254 Digital Servo boasts 47 oz-in torque and a speed of .06 sec/60° Remote Gain Function and Mode Switching Function Remote: Gain function allows sensitivity switching from the transmitter and mode switching function allows AVCS/normal gyro mode switching. Integrated, compact and lightweight design made possible by high density mounting technology. Conductive Resin Case: This case improves EMC (Electrostatic and electromagnetic interference) resistance. One year warranty

100% fully built, configured and tested..

• we can also custom build one for you using your choice of radio, gyro, servos.

• We offer JR, Spektrum, Futaba, and others.

• Pro built Align 450SA,450SEV2 Kits available.

• Pro built Raptor Nitro kits available

• Century Pro kits and many many more

Thank You…