This is the FASST 2.4GHz 14MZ 14-Channel Computer Radio from Futaba
with the R6014 2.4GHz FASST 14-Channel Receiver.
Does not include servos.
Contains software for airplanes, helicopters and gliders.
This is the helicopter version which will default to helicopter settings
when powered up and does not have a ratcheted throttle stick.
1 year limited warranty.

If your transmitter's region code is something other than the United
States,the TM-14 Module sold in the United States is not compatible with this
transmitter.  As such, it is necessary to purchase the TM-14 module which
matches the region code of the transmitter.

****     While you can obtain a 72Mhz or 50Mhz module for this radio,      ****
****                 it can only be purchased through                      ****
****              the service center at 217-398-8970 opt 2                 ****

Easily the most advanced radio system ever developed, the 14MZ brings many
innovations to radio design and technology. For the latest
information about the 14MZ visit the manufacturer web page at www.14mz.com
or www.2.4gigahertz.com

FASST FEATURES:
Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
very quickly virtually eliminating signal conficts and
interruptions unlike other 2.4GHz systems that only stay on one
or two frequencies
Dual antenna diversity enables FASST system to automatically and
seamlessly select the best reception between the two antennas
built into the receiver ensuring that the aircraft stays under
constant control of transmitter regardless of altitude
Pre-Vision Packet Screening technology scans incoming data for
potential problems and applies sophisticated error correction
techniques for solid impenetrable link with model
Easy Link system features a unique ID code in the transmitter that
links to the receiver insuring that receiver only follows commands
from this transmitter-with over 134 million possible codes there
is no chance for a conflict
When performing a ground check, the Power Down function allows
modeler to reduce power from up to 50+ paces away-like
retracting the antenna on a conventional transmitter
No hassle Fail Safe programmed through transmitter-no complicated
set-up steps or binding plugs
Purpose built custom IC chips for key functions; no off-the-shelf IC
chips

GENERAL FEATURES:
Real-Time Response
Double the resolution of PCM1024, the 14MZ's breakthrough PCM G3
2048 enables servos to pick up even the slightest stick movements.
It's the closest to actual real-time response possible, for
unprecedented speed and precision. The 14MZ is also backwards-
compatible, so pilots can still use 1024PCM and PPM receivers

Large Color Touch Screen
Only one company in the world could make the 14MZ display...it's
an engineering triumph in itself. The HGVA screen features
crystal clear 640x240 pixel resolution. It uses transflective
technology (layered transparent and reflective surfaces)
plus adjustable backlighting and contrast for easy visibility,
even in direct sunlight. Menu navigations and selections
can be made by touching the screen-or use the Dial-N-Key button
to scroll and select

Dual Internal Processors
The 14MZ takes advantage of two separate internal processors for
maximum efficiency and reliability. A custom Futaba processor
expertly directs all functions dedicated to flight control. Input
for general operating tasks-such as set-up and programming-is
processed by Windows CE.

Pre-Programmed Mixes
Numerous aircraft configurations are already programmed in. Just
select the needed setup

Servo Grouping
Multiple servos controlling a single function can be set up
through the transmitter and then plugged into differently
adjustable receiver channels (even non-consecutively) without
needing a separate servo synchronizer for mixing.

Switch Customizing
The eight shoulder switches can be reconfigured to your own
preference-just pull out switch and plug in the preferred style,
tall or short, button or toggle, spring-loaded or positionable.

R6014FS Receiver;
Futaba advanced technology allows this receiver to be the first
2.4GHz receiver able to utilize all 14 channels. It retains
G3 2048 resolution and Futaba Real Time Response from the
72MHz version.
Simple one-touch binding - no plugs to mess with or lose
A full range system for all aircraft from giant scale to
Park Flyer applications-no need to buy separate receiver for
specific aircraft
Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter to
select the best reception between the two receiver antennas with
no signal loss
Rubber grommets installed where antennas exit to eliminate stress
and fraying of the two antenna wires

Lithium-Ion Transmitter Battery
Even with the 14MZ transmitter's brilliant, full-color display,
fliers will enjoy 2-3 hours of operating time per charge from the
included 7.4V, 2200mAh Lithium-Ion battery pack

Compact Flash Card Data Storage & Transfer
Built-in 30-model memory, which can be expanded to 100 models
using the supplied Flash memory card. Upload digital images of
your aircraft for use as model names on the graphic menu. Create
and store audio files enabling you to fly to music or flight call
sequences.
The transmitter also includes a built-in mic for recording and
storing up to 24 voice prompts, such as "Landing gear down" and
"Full throttle!"  These prompts can be assigned to specific
switches and functions so that audio confirmations of proper
stick movement are heard through the transmitter's speaker.

INCLUDES:  14MZ Transmitter
2.4GHz TM-14 Module                              FUTL8934
R6014 2.4GHz FASST 14-Channel Receiver           FUTL7644
CFDP32M data pack memory card                    FUTM9410
LT2F2200 7.4V Lithium Ion transmitter battery    FUTM1475
LBC-1D5 Lithium Ion transmitter battery charger  FUTM1700
FBC-32 wall charger for receiver battery         FUTM1705
NR4F1500 NiCd 4.8V receiver battery              FUTM1285
Aluminum case with fully padded interior, two lockable latches and
two keys
Switch harness
Aileron extension cord
Y-harness
DSC (Direct Servo Control) cord
Woven adjustable neck strap
Rubber tipped stylus pen for touch panel, dress nut wrench, 2.5mm
and 1.5mm hex wrench
Instruction manual

REQUIRES:  Charging batteries before use
Servos of modeler's choice

SPECS:     Transmitter;
Operating System: 2-stick 14 channels, PCM-G3 synthesizer system
Transmitting Frequency: 2.4GHz, 72Mhz, or 50Mhz
Modulation: PCM-G3, PCM1024 or FM/PPM switchable
Power Supply: 7.4V LT2F2200 Lithium Ion battery
Current Drain: 1A maximum (RF power on and back light on)
700mA average