RC & MEHobbies is proud to offer:
100% professionally Built, configured and tested T-Rex 600N by Our AMA certified trainer and Pro Builders.
100% READY TO FLY when you receive it!!!
you will get the following:
1. a T-Rex 600 Nitro Heli , with Align Digital Servos and Gyro
2. A Spektrum DX7 Heli Radio and AR 7000 Receiver.
3. OS 50 Hyper Engine
4. Align 50 size Tuned Pipe
5. Set of Align 600MM Carbon Fiber Blades
6. Align 2-in-1 regulator, Gov and more.
*** Our pro builder will completely build the heli,
Install the electronics.
set-up the radio and configure the entire system.
Once done, He will break-in the engine and tune.
Then the heli will be taken and test flown, adjusted as needed till perfect and packaged for a safe trip to you.***
Why gamble on buying a complete system from overseas when you can get local USA support by RC & ME?
This is what you get:
1. Align 600N Limited Edition;
Features:
Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
• Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
• +-14° collective pitch is possible for extreme 3D performance.
• Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
• Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
- Pitch and All servos moved forward for CG.
• Battery tray designed for easy and clean radio gear installation.
• Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
• Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
- Heavy duty tail with thrust bearings.
• 95mm Tail Blades.
- Highly efficient shaft driven tail design.
• Rigid frame design that can also handle hard crashes without damage.
• Carbon Fiber frames, fins and boom supports.
• Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
• Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
1• Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).
• Fuel Tank designed so that no additional header tank is required.
• New main gear with one-way bearing design for high torque.
- New flybar paddles feature light weight and sports.
• New flybar control set design.
• New tail boom supports.
Specifications:
Length: 1160mm
- Height: 410mm
- Main blade length: 600mm
• Main rotor diameter: 1350mm
- Tail rotor diameter: 240mm
• Engine pinion gear: 20T
- Autorotation tail drive gear: 180T
• Drive gear ratio: 8.5:1:4.5(E:M:T)
• Flying weight: Approx. 3200g
Accessories:
T-REX 600 Nitro kits setX1 set
- 600D Carbon fiber bladeX1
• DS610 Digital servoX1
- GP780/DS620 Head lock gyro comboX1
• 2 In 1 voltage regulator comboX1
• RCE-G600 GovernorX1
2. DX7 Radio
Key Features
- 20-model memory
- Airplane and Heli software
- Switch assignment
- P-mixes
- Includes 4 powerful DS821 digital servos with high-tech resin gears
- 3-axis dual rate & expo
- 3-position flap (Airplane)
- 5-point throttle curve (Heli)
- Three flight modes plus hold (Heli)
- Gyro programming (Heli)
- CCPM, 2-servo 90°, 3-servo 90°, & 3-servo 120°
- Configured to default, helicopter model type (all airplane programming is available)
Overview
With the DX7 you’ll be able to fly anything from micro electric helis, to big gas-powered IMAC planes without regard to frequencies and free from fear of interference. Calling this kind of thing “revolutionary” just doesn’t cut it. It is nothing less than a quantum leap in RC technology that will change how you fly forever. Never again will the availability of a frequency pin dictate when you can take off. Never again will you have to ask, “What channel are you on?” Never again will your flying experience be interrupted by model-generated RF noise, interference from commercial broadcast towers, or anyone on another RC system.
Specs
- # of Channels:7
- Modulation:DSM2
- Band:2.4GHz
- Servos:DS821 Sport Digital Servos
- Receiver:AR7000
- Programming Features:Aircraft and Heli
- Model Memory:20-Model Memory
- Transmitter (Tx) Battery Type:1500mAh NiMH
3. OS 50 Engine
This is the O.S. Max .50 SX-H Ring Hyper Helicopter Engine with
Hyper Cooling Head and 60LH Carburetor.
FEATURES: Ideal for use in any 50 class helicopter
New head design offers improved combustion efficiency for stable
hovering and aerobatic flight
Large 0.39" (10mm) diameter carburetor intake for greater running
stability
Two year limited warranty
Same mounting dimensions as the O.S. Max .46FX-H
INCLUDES: One O.S. Max .50 SX-H Helicopter Engine with Hyper Cooling Head, 60LH
carburetor (OSMG2469), decal sheet, #8 glow plug, instruction manual
REQUIRES: 10% to 30% nitro Fuel with at least 18% lubricant (Helicopter Mix)
Starting equipment
SPECS: Output: 1.9ps/17,000 RPM
Practical RPM Range: 2,000-20,000 RPM
Displacement: 0.499 cid (8.0cc)
Bore: 0.866in. (21.99mm)
Stroke: 0.847in. (21.51mm)
Weight: 14.33oz (405.4g)
Full Build. Program, Engine Break-In, Engine Tune, Test fly and trim for perfect flight.
3 options for programming.
1. basic only
2. basic and basic 3d
3. full out 3d
Featured
